memMapIPCDrv - Memmap IPC Driver API

Description

This CUDA Driver API sample is a very basic sample that demonstrates Inter Process Communication using cuMemMap APIs with one process per GPU for computation. Requires Compute Capability 3.0 or higher and a Linux Operating System, or a Windows Operating System

Key Concepts

CUDA Driver API, cuMemMap IPC, MMAP

Supported SM Architectures

SM 5.0 SM 5.2 SM 5.3 SM 6.0 SM 6.1 SM 7.0 SM 7.2 SM 7.5 SM 8.0 SM 8.6 SM 8.7 SM 8.9 SM 9.0

Supported OSes

Linux, Windows, QNX

Supported CPU Architecture

x86_64, ppc64le, armv7l, aarch64

CUDA APIs involved

CUDA Driver API

cuDeviceCanAccessPeer, cuMemImportFromShareableHandle, cuModuleLoadDataEx, cuModuleGetFunction, cuMemSetAccess, cuModuleLoad, cuStreamCreate, cuMemRelease, cuInit, cuLaunchKernel, cuMemcpyDtoHAsync, cuMemCreate, cuDeviceGet, cuCtxDestroy, cuDeviceGetCount, cuMemMap, cuMemExportToShareableHandle, cuStreamSynchronize, cuCtxEnablePeerAccess, cuDeviceGetAttribute, cuOccupancyMaxActiveBlocksPerMultiprocessor, cuCtxSetCurrent, cuMemGetAllocationGranularity, cuMemAddressFree, cuMemUnmap, cuCtxCreate, cuStreamDestroy, cuMemAddressReserve

Dependencies needed to build/run

IPC

Prerequisites

Download and install the CUDA Toolkit 12.2 for your corresponding platform. Make sure the dependencies mentioned in Dependencies section above are installed.

Build and Run

Windows

The Windows samples are built using the Visual Studio IDE. Solution files (.sln) are provided for each supported version of Visual Studio, using the format:

*_vs<version>.sln - for Visual Studio <version>

Each individual sample has its own set of solution files in its directory:

To build/examine all the samples at once, the complete solution files should be used. To build/examine a single sample, the individual sample solution files should be used.

Note: Some samples require that the Microsoft DirectX SDK (June 2010 or newer) be installed and that the VC++ directory paths are properly set up (Tools > Options...). Check DirectX Dependencies section for details."

Linux

The Linux samples are built using makefiles. To use the makefiles, change the current directory to the sample directory you wish to build, and run make:

$ cd <sample_dir>
$ make

The samples makefiles can take advantage of certain options:

TARGET_ARCH= - cross-compile targeting a specific architecture. Allowed architectures are x86_64, ppc64le, armv7l, aarch64. By default, TARGET_ARCH is set to HOST_ARCH. On a x86_64 machine, not setting TARGET_ARCH is the equivalent of setting TARGET_ARCH=x86_64.
$ make TARGET_ARCH=x86_64
$ make TARGET_ARCH=ppc64le
$ make TARGET_ARCH=armv7l
$ make TARGET_ARCH=aarch64
See here for more details.
dbg=1 - build with debug symbols
```
$ make dbg=1
```
SMS="A B ..." - override the SM architectures for which the sample will be built, where "A B ..." is a space-delimited list of SM architectures. For example, to generate SASS for SM 50 and SM 60, use SMS="50 60".
```
$ make SMS="50 60"
```
HOST_COMPILER=<host_compiler> - override the default g++ host compiler. See the Linux Installation Guide for a list of supported host compilers.

    $ make HOST_COMPILER=g++

4.2 KiB Raw Blame History